Panel Roll-Forming Machines: What To Consider Before Purchase

12/1/2020
Sharon Thatcher

One of the first considerations when buying a stationary panel roll former is whether to buy a single, dual, or multiple profile machine.

 

WHAT ARE THE OPTIONS?
Single profile roll formers
 have only one set of stands, shafts, and roller die tooling and are a good choice if you want to roll form one particular profile. Depending on the profile, you are able to choose between pre- or post-cut lines. Entry-level machines come with a less expensive price tag and produce at speeds of approximately 100-150 FPM. Companies with high volume demands typically use single profile machines with flying cut-off systems reaching speeds of up to 400 FPM. 

 

Benefits: Affordable, good entry-level machines are available for startups that don’t need optimum speed, while higher-priced lines in the same category offer excellent production speeds for high-volume companies.
Disadvantages: Capable of processing only one panel profile.

 

Dual profile machines are often referred to as dual-height or double-deck machines because there is a lower set of stands and tooling for one profile, and a higher set of stands and tooling for the second profile. Both levels sit on a common base. Material feeds in and exits from either the higher or lower level. If floor space is limited, adding a second deck to your existing roll former is a good option.

 

Running two profiles on only one machine will also save on manpower and the additional cost for a second set of ancillary items (electrical setups, controllers, uncoilers, shears, etc.) needed for a new line. While a space-saver, you can only operate on one level at a time. The following are the most common profiles on dual profile panel lines:


• “Ag” Panels
• R/PBR Panels
• U/PBU Panels
 

Benefits: Provides owner the ability to offer two styles of panel; savings in floor space, manpower, and ancillary items.
Disadvantages: Only one profile can run at any given time.

 

Multiple profile machines, also called subplated or rafted machines, produce on a single level and are on the higher end cost-wise. These lines are typically used by larger manufacturers that have a demand for many different profiles. This demand does not exist in all markets, but there are exceptions. Each profile has its own set of stands and tooling mounted to interchangeable “subplates” (also called rafters or cartridges). Changeovers are relatively quick, but access to an overhead crane or forklift is needed to switch the subplates/rafters/cartridges.

 

Benefits: Ability to serve an unlimited number of panel profile demands, eliminating the need for multiple machines.
Disadvantages: Typically more costly than a single or dual profile. Overhead rigging (forklift or crane) needed for changeovers.

 

WHAT IS YOUR EXISTING AND POTENTIAL MARKET? 
Experts universally agree that a potential buyer should know their market before buying any machine. The typical market for regional roll formers today calls for either an ag panel or an R/PBR panel, but maybe both, neither, or more.

 

How do you find out? Ask the roofers and/or lumberyards you plan to manufacture for. There’s a strong demand for regional panel favorites—in both style and gauge—which can change, but they don’t usually vary often or dramatically. Roofers tend to stay with the panel they are most familiar with and comfortable using. That can be dictated by whether their market is primarily residential, commercial, agricultural, or a combination.

 

 

FABTECH